Mini-Split Condensate Pump Guide: SPS, SPB, SPL, and SPC Series Compared

A standard vertical condensate pump isn't always the right fit for a ductless mini-split — space behind and below the indoor unit is often tight, and the pump needs to mount directly to or near the unit itself. Mini-split condensate pumps are built specifically for that constraint.

Four Mounting Styles, One Spec Sheet

SPS Series

Mounts along the top of the indoor unit with a compact horizontal profile.

View SPS-66 →

SPB Series

Boxed housing design that sits just below the indoor unit for a clean, enclosed look.

View SPB-66 →

SPL Series

Low-profile mounting positioned tight against the wall and unit for minimal visible footprint.

View SPL-66 →

SPC Series

Compact side-mount design for installations with limited space beside the indoor unit.

View SPC-66 →

Shared Specifications Across the Line

Spec Rating
Voltage 100–240V AC, 50/60Hz
Max Flow @ 0 Head 40 L/H (10.60 Gal/H)
Sound Level @ 1M 19 dBA
Max Discharge Head 20M (66 ft)
Max Suction Lift 1M (3.30 ft)
Safety Switch 3A
Max Water Temp 70°C (158°F)
Tank Capacity 40ml (0.011 Gal)

The universal 100–240V, 50/60Hz voltage range means one pump model can cover both US and international voltage standards, simplifying inventory for wholesalers serving mixed equipment installations.

Built-In Protection Features

  • Thermal protection — shuts down the pump motor before heat damage occurs
  • Overflow alarm — alerts before the tank overflows, rather than relying on a silent cutoff alone
  • Automatic tank cleaning — reduces buildup that leads to premature pump fouling
  • Anti-mold tank — helps keep the small reservoir sanitary in a component that's easy to forget during routine maintenance
⚠ 66 FT Head Doesn't Mean Unlimited Placement Max discharge head is a ceiling, not a target — actual usable lift is reduced by tubing length, elbows, and any additional restriction in the discharge line. Plan the real-world run distance with margin, not the max spec.
💡 Pro Tip A sound level of 19 dBA at 1 meter is quiet enough to go virtually unnoticed in a bedroom or living space — worth mentioning to homeowners concerned about pump noise near a wall-mounted mini-split.

Quick Answers

Which mounting style should I choose?

It depends on the physical clearance available around the indoor unit — SPS for top-mount, SPB for an enclosed box below the unit, SPL for a low-profile wall-tight install, and SPC for tight side clearance.

Do all four series share the same electrical rating?

Yes — voltage, flow rate, discharge head, and safety switch rating are consistent across the SPS-66, SPB-66, SPL-66, and SPC-66 models; the difference is purely the mounting form factor.

Why Wholesalers Stock Smart Electric® & Hercules™

A mounting-style option for nearly any mini-split clearance situation:

  • Sold exclusively through HVACR wholesalers — never big-box retail
  • Consistent specs across all four mounting styles, simplifying training at the counter
  • Built-in thermal protection, overflow alarm, and anti-mold tank as standard

Talk to a Smart Electric® Rep →

Back to blog